Software recovery reinstalls the software on your reMarkable paper tablet, even if the device is unresponsive. You can also use software recovery to exit Developer mode.
The process can take up to 20 minutes and requires a computer with an internet connection.
Software recovery is only available for:
- reMarkable Paper Pro
- reMarkable Paper Pro Move
- reMarkable Paper Pure
Before you begin
You'll need:
- A computer connected to the internet.
- A USB-C cable to connect your paper tablet to your computer.
- The reMarkable desktop app, version 3.14.1 or newer, if you're using Windows.
- macOS 12 or newer, if you're using a Mac.
Keep your paper tablet connected to your computer throughout the recovery process.
Choose whether to keep or erase your data
During recovery, you can choose between two options:
|
Recovery option
|
What happens
|
|---|
|
Restore data
|
Reinstalls the software while attempting to preserve your user data.
|
|
Factory reset
|
Reinstalls the software and erases user data stored locally on your paper tablet.
|
Important: Factory reset removes locally stored data from your device. Files already synchronized with the reMarkable cloud remain available in the cloud, but files that haven't been synced may be lost.
If you want to keep your data, choose Restore data.
How to recover your software on Windows
1. Connect your paper tablet
Connect your reMarkable to your Windows computer using a USB-C cable.
Open the reMarkable desktop app and keep it running throughout the recovery process.
2. Put your paper tablet into recovery mode
- Press and hold the power button on your paper tablet for 30 seconds.
- Release the power button.
- Press and hold the power button again for 3 seconds.
3. Open Recovery in the desktop app
- Open Settings from the desktop app's side menu.
- Select Help.
- Select Recovery.
Note: You must open Help through Settings in the side menu. Recovery isn't available under Help in the top menu bar.
4. Choose a recovery option
Under Settings > Help > Recovery, select Start recovery.
Choose one of the following:
- Restore data > Continue to reinstall the software while attempting to preserve your user data.
- Factory reset > Continue to reinstall the software and erase locally stored user data.
5. Wait for recovery to finish
Keep your paper tablet connected and the desktop app open while recovery is in progress.
You can follow the progress in the desktop app.
When recovery is complete, select Close. You can then close the desktop app and turn on your paper tablet.
How to recover your software on Mac
1. Connect your paper tablet
Connect your reMarkable to your Mac using a USB-C cable.
Keep the cable connected throughout the recovery process.
2. Put your paper tablet into recovery mode
- Press and hold the power button for 30 seconds.
- Release the power button.
- Press and hold the power button again for 3 seconds.
Note: Your paper tablet won't display a confirmation that recovery mode has started.
3. Download the recovery tool
Download the version that matches your Mac's processor:
To check which processor your Mac uses:
- Select the Apple menu in the upper-left corner.
- Select About This Mac.
- Check whether your Mac has an Intel processor or an Apple chip.
Download the matching recovery tool.
4. Open the recovery tool in Terminal
- Locate the downloaded ZIP file, usually in your Downloads folder.
- Extract the ZIP file.
- Right-click the rm_recover folder.
- Select New Terminal at Folder.

If your Mac asks for permission to connect an accessory, select Allow.
5. Check that your paper tablet is detected
In Terminal, enter:
./rm_recover discover-device
Check the result:
- status:OK — Your paper tablet is detected and ready for recovery.
- status:FAIL — Repeat step 2 to put your paper tablet into recovery mode, then run the command again.
6. Choose a recovery option
In Terminal, enter one of the following commands.
To reinstall the software while attempting to preserve your data:
./rm_recover restore
To reinstall the software and erase locally stored data:
./rm_recover reset
Enter your Mac login password if prompted.
Note: Terminal won't display characters while you type your password. This is expected.
7. Wait for recovery to finish
Keep your paper tablet connected while the recovery tool runs.
The process may take several minutes. Your paper tablet's display may turn on and off during recovery.
When recovery is successful, your paper tablet should restart automatically.
What should I do if software recovery fails?
If recovery is interrupted or doesn't complete:
- Check that the USB-C cable is securely connected.
- Keep your computer connected to the internet.
- Restart the recovery process using the instructions for your operating system.
If you're using a Mac and see status, repeat the power-button sequence and check device detection again.
If recovery still doesn't work, contact reMarkable Support.
How do I access my files after recovery?
After recovery, you can pair your paper tablet with your reMarkable account to access files available in the reMarkable cloud.
Important: Files that weren't synchronized before a factory reset are not recoverable.
For help with pairing your paper tablet, see How do I pair my reMarkable with the cloud?